1J30 is a magnetic temperature compensation alloy. Specifications: Cold-rolled strip: 0.03-0.10×2.5-100mm, 0.10-1.00×1.5-200mm, 1.00-2.50×6.0-200mm. Product Features: This is a type of alloy with a low Curie temperature (25℃ to 200℃). Its prominent feature is that below the Curie temperature, the magnetic induction value decreases sharply with increasing temperature, and it almost shows a linear relationship. Product Applications: Typically used in magnetic temperature compensation components or temperature sensing elements in devices such as traveling wave tubes, magnetrons, wind direction and wind flow meters, voltage regulators, odometers, gasoline gauges, and electric meters that use permanent magnets.
1J18 main characteristics: higher saturation magnetic induction intensity, lower residual magnetic induction intensity. Main uses: electromagnetic valves in various control systems that work under conditions affected by media, temperature, and pressure, resistant to corrosion in weather, salt spray, or hydrazine environments.
1J117 is a corrosion-resistant soft magnetic alloy that is easily magnetized under the influence of an external magnetic field, and the magnetic induction intensity essentially disappears after the magnetic field is removed. Applications: It is mainly used in electromagnetic devices working in oxidizing media and hydrazine media, as well as various control devices, armatures, electromagnets, pneumatic valves, and hydraulic valves that operate without protective layers in humid and corrosive environments.
Grade: Magnetic temperature compensation soft magnetic alloy 1J33 1J38 Implementation standard: GB/T 14986-2008 Characteristics: Below the Curie temperature, its magnetic induction strength decreases sharply and approximately linearly with the increase in temperature. Uses: Magnetic branch compensation components in electromagnetic circuits and permanent magnetic circuits.
The 1J33 density has three types: true density, apparent density, and effective density. What role does it play in 1J33 material? 1. Before casting 1J33 steel, the factory needs to estimate how much metal to melt, which can be calculated based on the mold's volume and the density of 1J33 steel to determine the required amount of metal. 2. It is used to calculate the mass of 1J33 steel specifications that are difficult to weigh or the volume of 1J33 steel with complex shapes. 3. It helps identify unknown components in 1J33 steel.
1J32 is a lead-sulfur composite free-cutting structural steel. In lead-free cutting steel, lead is distributed in the steel as tiny elemental metal particles and does not dissolve in the steel. During the cutting process, strong friction occurs between the tool and the workpiece, causing the lead particles in the steel to melt and precipitate, thus providing lubrication to improve the cutting performance of the steel, resulting in finer chips and reduced wear, ultimately extending tool life. Compared to lead-free steel, the cutting performance of lead-containing steel can be improved by 20-50%, while its mechanical properties and heat treatment performance remain basically unchanged, and it has no impact on cold and hot workability and weldability. Lead-free cutting steel has been widely used in the manufacture of precision instrument parts, automotive parts, and important components of various machines. However, lead-free cutting steel has low contact fatigue resistance, so it is not suitable for components like gears and bearings that bear high fatigue stress loads.
Chromium-nickel-manganese-nitrogen austenitic stainless steel 00Cr22Ni13Mn5Mo2N (Nitronic 50) has good corrosion resistance and strength. It remains non-magnetic even under severe cold deformation or prolonged exposure at low temperatures. This steel is generally used in petrochemical, chemical, pulp and paper, textile food processing, and marine industries.
W.Nr.2.4819 has been widely used in the chemical and petrochemical fields, such as in components and catalytic systems that come into contact with chlorinated organic compounds. This material is particularly suitable for use in high-temperature environments, as well as in inorganic and organic acids (such as formic acid and acetic acid) mixed with impurities, and in seawater corrosion environments.
GH32 high-temperature alloy has good oxidation and corrosion resistance, moderate durability and creep strength below 900°C, and good formability in cold and hot processing as well as welding performance.