Dedicated to special alloy product solutions

Chromium-nickel-manganese-nitrogen austenitic stainless steel 0Cr18Ni3Mn13N (Nitronic 33) is a low-nickel austenitic stainless steel with high yield strength (about twice that of 304), good stress corrosion resistance, low magnetic permeability, and good low-temperature performance. Its wear resistance is much better than that of general austenitic stainless steels, and it can be produced using methods for manufacturing austenitic stainless steel without the need for heat treatment before or after welding. 0Cr18Ni3Mn13N has the following characteristics: ① high yield strength, ② good stress corrosion resistance, ③ maintains very low magnetic permeability even under conditions of large deformation cold working, ④ good matching of strength and plasticity, ⑤ excellent wear resistance. Almost all properties exceed those of 304 stainless steel.

GH2135 is a high-temperature alloy based on iron and nickel developed independently in our country. Except for slightly lower fatigue performance, its other properties have reached or exceeded the level of the nickel-based alloy GH33. The alloy has good hot workability, but its machinability is relatively poor; after surface aluminum diffusion treatment, it shows good resistance to oxidation. Practical experience has proven that this alloy is quite mature and reliable for use. It can be used at temperatures ranging from 500 to 1000°C, and is suitable for manufacturing general load-bearing components in aviation, aerospace, gas turbines, and other industrial applications.

Product specifications include bars, plates, pipes, wires, strips, flanges, and forgings, widely used in fields such as petroleum, aerospace, shipping, energy, military industry, electronics, environmental protection, machinery, and instruments. Material quality is guaranteed, and orders are welcome.

GH6159 is a Co-Ni-Cr based precipitation hardening deformation high-temperature alloy, used at temperatures below 600°C. The alloy incorporates nickel, chromium, and molybdenum for solid solution strengthening, and adds aluminum and titanium to form a dispersed γ' phase for precipitation strengthening. Additionally, cold deformation induces a networked ε phase that prevents long-range dislocation movement, thereby strengthening the alloy. The alloy has a high strain hardening rate, exhibiting ultra-high strength, good plasticity, and high stress corrosion resistance at both room and high temperatures. This alloy is currently one of the best high-temperature alloys for engine fasteners, with high strength and shear resistance for long-term use below 600°C. The main products supplied by Ye Han Industrial are deep cold drawn bars.

GH4099 (GH99) is a highly alloyed nickel-based aging plate alloy, reinforced with elements such as cobalt, tungsten, aluminum, and titanium, which gives the alloy high thermal strength. It can be used for long periods below 900°C, with a maximum working temperature of up to 1000°C. This alloy has a stable microstructure and satisfactory hot and cold processing forming and welding process performance, making it suitable for manufacturing high-temperature plate welded structural components such as combustion chambers and afterburners for aircraft engines. Large plate structural components made from this alloy can be used directly after solution treatment without aging treatment. The main products include plates and wires, and it can also produce plates and forgings.

GH4141 is a precipitation-hardened nickel-based superalloy that exhibits high tensile and creep strength, as well as good oxidation resistance in the temperature range of 650 to 950°C. Due to the high content of aluminum, titanium, and molybdenum in the alloy, it is difficult to forge the cast ingots; however, the deformed material has good plasticity and can be cold-formed in the annealed state. It can also be welded, but welded components are prone to strain-age cracking during heat treatment. The alloy is available in various forms, including thin plates, strips, wires, discs, rings, forgings, bars, and precision castings, making it suitable for manufacturing high-temperature components for aerospace and aviation engines that require high strength below 870°C and oxidation resistance below 980°C.

Heat treatment methods and characteristics of GH1139: 1. Solid solution strengthening is an important form of metal strengthening, which enhances the strength and hardness of metals by forming a solid solution. When the solute content is appropriate, it can significantly improve the strength and hardness of the material without a noticeable decrease in plasticity and toughness, which is its main characteristic. 2. Aging strengthening can be divided into artificial aging and natural aging. Natural aging strengthening occurs during the process of placing the alloy at room temperature, leading to strengthening; while artificial aging strengthening occurs during the low-temperature heating process, resulting in strengthening of the alloy. Both methods are based on solid solution strengthening and aim to improve the strength of the alloy. 3. Precipitation strengthening is based on aging strengthening, with the goal of reinforcing the alloy. Adding elements such as cobalt, tungsten, and molybdenum allows the alloy to achieve very high yield strength.

GH4105 is a Ni-Co-Cr based precipitation hardening deformation high-temperature alloy, used at temperatures between 750°C and 950°C. The alloy has high strength at room and high temperatures, good oxidation resistance, but average hot workability and weldability. It is suitable for manufacturing high-temperature components such as turbine blades for aircraft engines and high-temperature bolts. Main products include hot-rolled bars and flat steel, cold-drawn bars, profiles, and rings.

GH39 high-temperature alloy detailed explanation: This alloy is a single-phase austenitic solid solution strengthened alloy, which has moderate thermal strength and good thermal fatigue performance below 800°C. It has good oxidation resistance below 1000°C, stable microstructure for long-term use, and also possesses good cold formability and weldability. It is suitable for long-term use in aircraft engine combustion chambers and afterburner components below 850°C.

Overview of GH30 The alloy is a single-phase austenite after solution treatment, and its structure remains stable during use. The main products are cold-rolled thin plates, but it can also supply deformed products such as bars, rings, wires, and tubes. The products are primarily used for components of turbine engine combustion chambers operating below 800°C and other high-temperature components that require oxidation resistance but bear very little load below 1100°C.

< 1...678...11 >