Dedicated to special alloy product solutions

Inconel 600 is an early-developed nickel-chromium-iron-based solid solution strengthened alloy, which has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700°C. The alloy can be strengthened through cold working and can be joined using resistance welding, fusion welding, or brazing. It is available in forms such as cold-rolled thin plates, hot-rolled thick plates, strips, wires, bars, discs, rings, and ring forgings, making it suitable for manufacturing oxidation-resistant parts that bear low loads at temperatures below 1100°C.

Inconel 601 (UNS N06601) is a nickel-based alloy with a chromium content of 21.0-25.09% and a nickel content of approximately 72%. This high-temperature nickel-based alloy exhibits strong oxidation resistance, high-temperature resistance, and corrosion resistance, and it also possesses high mechanical properties at elevated temperatures. Inconel 601 (UNS N06601) has high high-temperature strength, excellent oxidation resistance, and resistance to carbon and sulfur penetration. Particularly, it demonstrates outstanding resistance to oxidation spalling in environments with severe temperature fluctuations and repeated oxidation, making it widely used in various components of heat treatment furnaces, as well as in diesel automotive glow plug components.

Inconel 718 alloy is a nickel-based superalloy that is precipitation strengthened by body-centered cubic phase (y") and face-centered cubic phase (γ). It exhibits excellent comprehensive performance in the temperature range of -253 to 700°C, with the highest yield strength among deformed high-temperature alloys below 650°C, as well as good fatigue resistance, radiation resistance, oxidation resistance, and corrosion resistance. It also has good machinability, weldability, and long-term microstructural stability, allowing for the manufacture of complex-shaped components. It has found extensive applications in aerospace, nuclear energy, and the petroleum industry within the aforementioned temperature range.

Inconel 625 is a nickel-based high-temperature alloy that is solid-solution strengthened with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance, good tensile properties and fatigue properties from low temperatures up to 980°C, and is resistant to stress corrosion in salt spray environments. Therefore, it can be widely used in the manufacture of aircraft engine components, aerospace structural components, and chemical equipment. The alloy has good processing and welding properties and is available in various forms such as plates, bars, pipes, wires, strips, and forgings.

GH4043 high-temperature alloy is an age-hardened nickel-based high-temperature alloy composed of elements such as nickel, molybdenum, and aluminum, with a nickel content of approximately 68%. The GH4043 high-temperature alloy has good hot and cold working properties, remains stable in structure at temperatures below 850°C, possesses sufficient strength, and exhibits good overall performance, with oxidation resistance comparable to that of GH4037.

GH738 is a nickel-based superalloy that is precipitation-hardened with the γ′ phase. It has good resistance to gas corrosion, high yield strength, and fatigue performance, along with good process plasticity and stable microstructure. It is widely used in rotating components of aircraft engines, with a service temperature not exceeding 815°C. It can be produced in cold-rolled and hot-rolled sheets, pipes, strips, wires, as well as forgings, castings, and fasteners.

GH3039 is a single-phase austenitic solid solution strengthened alloy, which has moderate thermal strength and good thermal fatigue performance below 800°C, and good oxidation resistance below 1000°C. It has stable microstructure for long-term use, as well as good cold formability and weldability. It is suitable for components in aircraft engine combustion chambers and afterburner chambers for long-term use below 850°C. This alloy can be produced in the form of plates, bars, wires, pipes, and forgings.

GH3030 is an early developed solid solution strengthened high-temperature alloy with a composition of 80Ni-20Cr. It has a simple chemical composition and exhibits satisfactory thermal strength and high plasticity below 800°C, along with good resistance to oxidation, thermal fatigue, cold stamping, and welding process performance. After solution treatment, the alloy is a single-phase austenite, and its structure remains stable during use. The main products are cold-rolled thin sheets, but it can also supply deformed products such as bars, rings, wires, and pipes. It is mainly used for turbine engine combustion chamber components operating below 800°C and other high-temperature components that require oxidation resistance but bear very little load below 1100°C.

GH600 is an early-developed nickel-chromium-iron-based solid solution strengthened alloy, which has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700°C. The alloy can be strengthened through cold processing and can be joined using resistance welding, fusion welding, or brazing. It is available in cold-rolled thin sheets, hot-rolled thick plates, strips, wires, bars, discs, ring blanks, and ring forgings, making it suitable for manufacturing oxidation-resistant parts that bear low loads below 1100°C.

GH3044 is a solid solution strengthened nickel-based oxidation-resistant alloy, which exhibits high plasticity and moderate thermal strength below 900°C. It has excellent oxidation resistance and good stamping and welding process performance, making it suitable for manufacturing components of aircraft engine main combustion chambers and afterburner chambers that operate long-term below 900°C, as well as thermal insulation screens and guide blades. The available forms include plates, strips, wires, bars, and rings.

GH3625 is a solid solution strengthened nickel-based superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance, good tensile and fatigue properties from low temperatures up to 980°C, and resistance to stress corrosion in salt spray environments. Therefore, it can be widely used in the manufacture of aircraft engine components, aerospace structural parts, and chemical equipment. The alloy has good processing and welding properties and can supply various forms such as plates, bars, pipes, wires, strips, and forgings.

GH3536 is a nickel-based high-temperature alloy with a high iron content, primarily strengthened by chromium and molybdenum. It has good resistance to aging and corrosion, with moderate durability and creep strength below 900°C. It also has good cold and hot workability and welding performance. It is used in the manufacture of combustion chamber components and other high-temperature parts for aircraft engines, with long-term use below 900°C and short-term working temperatures up to 1080°C. The main supplied varieties include plates, strips, pipes, bars, forgings, rings, and precision castings.

GH4033 high-temperature alloy is based on nickel-chromium, with the addition of aluminum and titanium to form γ phase dispersion-strengthened alloy. It has sufficient high-temperature strength at 700-750°C and good oxidation resistance below 900°C. This alloy has good heating workability and is mainly supplied as hot-rolled bars and discs, used in engine rotor parts.

GH3037 (GH37) alloy is an austenitic age-hardened nickel-based alloy, with a total addition of about 4% aluminum and titanium to form the γ phase for age hardening. It also contains a significant amount of tungsten and molybdenum for solid solution strengthening, and a trace amount of boron to strengthen the grain boundaries. This alloy is used below 850°C, exhibiting high thermal strength, good overall performance, and structural stability, and is widely used in the manufacture of turbine blades for aircraft engines, with long-term use at temperatures between 800-850°C.

GH4043 high-temperature alloy is an age-hardened nickel-based high-temperature alloy composed of elements such as nickel, molybdenum, and aluminum, with a nickel content of approximately 68%. The GH4043 high-temperature alloy has good hot and cold working properties, remains stable in structure at temperatures below 850°C, possesses sufficient strength, and exhibits good overall performance, with oxidation resistance comparable to that of GH4037.

GH4049 (GH49) high-temperature alloy is a precipitation-hardened nickel-based high-temperature alloy composed of elements such as nickel, molybdenum, and aluminum, with a nickel content of about 70%. The GH4049 high-temperature alloy has good hot and cold working performance, high-temperature strength below 950°C, low notch sensitivity, and good oxidation resistance and fatigue strength, although it has poor single hot working plasticity. Its hot working plasticity can be improved through vacuum consumable or electroslag remelting.

< 1...891011 >