Contact:+86 138-1700-8492
Dedicated to special alloy product solutions
MengziInconel690
Category:
MengziInconel Series
Tel: 0510-86685586
Product Description
Inconel690(62Ni-28Cr-10Fe)
1. Chemical composition of Inconel690:
|
Ni |
Cr |
Fe |
C |
Al |
Ti |
Mn |
Si |
Cu |
P |
S |
|
Allowance |
30.39 |
8.88 |
0.023 |
0.22 |
0.26 |
0.23 |
0.07 |
0.02 |
0.006 |
0.002 |
2. Physical and mechanical properties of Inconel690:
Physical and mechanical properties of annealed alloy 690.
|
Density |
Melting |
Young’s modulus |
Poisson’s ratio |
Yield strength |
Tensile strength |
Elongation |
|
density |
melting point |
Young's modulus |
Poisson's ratio |
Yield strength |
tensile strength |
Elongation |
|
8.19g/cm |
1343-1377℃ |
211GPa |
0.289 |
350MPa |
700MPa |
45% |
3. Inconel690 special features:
Inconel 690 alloy has excellent resistance to intergranular corrosion and intergranular stress corrosion cracking, and is mainly used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants. Materials for heat transfer tubes for steam generators in PWR nuclear power plants have gone through a history of development, including 304 austenitic stainless steel, Inconel 600 alloy, 800 alloy and Inconel 690 alloy. Corrosion failure studies in service with Inconel 600 alloys have shown that intergranular corrosion and intergranular stress corrosion cracking are major problems. Inconel 690 alloy is used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants, and there have been no reports of breakage since it was put into use in the 90s of the last century.
4. Main applications of Inconel690:
Inconel690 alloy is mainly used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants, and is the core technology of steam generators. At present, among the pressurized water reactor nuclear power plant units that have been operated in China, only Qinshan Phase I uses 800 alloy, and Qinshan Phase II, Daya Bay and Lingao Nuclear Power Plants all use Inconel690 alloy as the heat transfer pipe material of steam generators. Most of the PWR nuclear power plants under construction and planning also use Inconel 690 alloy as the heat transfer tube material for steam generators.
Next article
Our company mainly deals in nickel based special alloys such as high-temperature alloys, Hastelloy alloys, Inconel alloys, Monel alloys, precision alloys, titanium alloys, etc. We provide zero cutting, machinability, non-standard customization and other needs. If you have any needs, please contact us in a timely manner!
Navigation
Contact
Building 1, Lane 103, Sizhuan Road, Songjiang District, Shanghai
Browse Mobile