Product classification
GH4141
GH4141 is a precipitation-hardened nickel-based superalloy that exhibits high tensile and creep strength, as well as good oxidation resistance in the temperature range of 650 to 950°C. Due to the high content of aluminum, titanium, and molybdenum in the alloy, it is difficult to forge the cast ingots; however, the deformed material has good plasticity and can be cold-formed in the annealed state. It can also be welded, but welded components are prone to strain-age cracking during heat treatment. The alloy is available in various forms, including thin plates, strips, wires, discs, rings, forgings, bars, and precision castings, making it suitable for manufacturing high-temperature components for aerospace and aviation engines that require high strength below 870°C and oxidation resistance below 980°C.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
GH4141It is a precipitation hardening nickel-based superalloy.650~950In the range of ℃, it has high tensile and long-term creep strength and good oxidation resistance. Due to the high content of aluminum, titanium, and molybdenum in the alloy, it is relatively difficult to cast and forge, but the deformed material has good plasticity, can be cold-formed in the annealed state, and can also be welded. However, the welded components are prone to strain aging cracks during heat treatment. The alloy varieties include thin plates, strips, wires, discs, rings, forgings, bars, and precision castings, suitable for manufacturing high-temperature components of aerospace engines that require high strength and oxidation resistance below ℃.870High strength and oxidation resistance are required below ℃.980High-temperature components of aerospace engines.
GH4141Material gradeGH141(GH4141).
GH4141Similar gradesUNS N07041,Rene′41,R41,Carpenter41,PYROMET41,UNITEMP41, HynessalloyR41,J1610(USA).
GH4141Chemical composition
C Cr Ni Co Mo Al Ti B Fe Zr Mn Si P S Cu
Not greater than
0.06~0.12 18.0~20.0 Remaining 10.0~12.0 9.00~10.50 1.40~1.80 3.00~3.50 0.003~0.010 5.00 0.07 0.50 0.50 0.015 0.015 0.50
Note: Aerospace materials can add ω(Mg)<0.05%.and ω(La)<0.035%..
GH4141Melting temperature range 1316~1371℃.
GH4141Density ρ=8.27g/cm3.
GH4141Welding performance
GH4141The alloy can be welded by fusion welding, diffusion welding, brazing, and friction welding. Fusion welding can be done using electron beam welding or argon arc welding. The weld seams tend to produce strain aging cracks during heat treatment. To minimize this tendency, slow solution annealing should be performed before welding, i.e., at ℃, followed by cooling to ℃.1080℃22Cooling to/min℃; another method is to perform aging treatment before welding, i.e., at650℃,1080, for30min4h,1.7~4.4Cooling to/min℃; another method is to perform aging treatment before welding, i.e., at980,4h4h,1.7~4.4Cooling to/min℃; another method is to perform aging treatment before welding, i.e., at870, forthen for16h,1.7~4.4Cooling to/min℃; another method is to perform aging treatment before welding, i.e., at760, forair cooling.[1,1619]~.After welding, to eliminate welding stress and restore performance, rapid heating through the aging hardening temperature range should be done to eliminate the tendency for strain aging cracking. Using fine-grained, low-impurity content base materials, eliminating work hardening, and low welding line energy can also reduce the tendency for strain aging cracking.
GH4141Application overview and special requirements This alloy is widely used in the manufacture of high-temperature load-bearing components for aerospace engines, such as guide blades, combustion chambers, turbines, high-temperature load-bearing parts of guides, shafts, discs, blades, and fasteners. The strain aging cracks in the heat treatment of welded plates can be resolved by pre-aging treatment before welding or controlling the cooling rate after solution treatment. Standard heat treatment should be performed after welding.
Previous Page
Gh1139
Next Page
Related Products
Product Consulting
Leave your contact information to get a free product quote!