Product classification
Gh1333
GH1333, also known as RA333, is a Fe-Ni-Cr based solid solution strengthened deformation high-temperature alloy. This alloy is solid solution strengthened by adding elements such as chromium, tungsten, and molybdenum, with a usage temperature range below 900°C. GH1333 is known for its high-temperature strength, excellent oxidation resistance, and thermal corrosion resistance, while also having good machinability and weldability.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
1. Introduction
GH1333, also known as RA333, is a Fe-Ni-Cr based solid solution strengthened deformation high-temperature alloy. This alloy is solid solution strengthened by adding elements such as chromium, tungsten, and molybdenum, with a service temperature range below 900℃. GH1333 is known for its high-temperature strength, excellent oxidation resistance, and thermal corrosion resistance, while also having good processing and welding performance.
2. Chemical Composition
The chemical composition of GH1333 is as follows:
· Carbon (C): ≤0.08%
· Chromium (Cr): 24.00~27.00%
· Nickel (Ni): 44.00~47.00%
· Cobalt (Co): 2.50~4.00%
· Tungsten (W): 2.50~4.00%
· Molybdenum (Mo): 2.50~4.00%
· Aluminum (Al): ≤0.20%
· Titanium (Ti): ≤0.20%
· Iron (Fe): balance
· Niobium (Nb): ≤0.20%
· Boron (B): ≤0.006%
· Silicon (Si): 0.75~1.50%
· Manganese (Mn): ≤2.00%
· Sulfur (S): ≤0.030%
· Phosphorus (P): ≤0.030%
· Tin (Sn): ≤0.025%
· Lead (Pb): ≤0.025%
· Copper (Cu): ≤0.50%
The proportions of these components have a significant impact on the performance of the alloy.
3. Physical Properties
The physical properties of GH1333 are as follows:
· Density: approximately 8.23 g/cm³
· Melting point: —
· Coefficient of thermal expansion: —
· Thermal conductivity: —
· Specific heat capacity: —
· Resistivity: —
These physical property data are crucial for the application and processing of materials.
4. Mechanical Properties
The mechanical properties of GH1333 are as follows:
· Tensile strength (σb/MPa): ≤828 MPa
· Yield strength (σp0.2/MPa): —
· Elongation (δ5/%): ≥30%
· HRB: ≤95
These properties enable GH1333 to perform excellently in various applications.
5. Heat Treatment
The heat treatment regime for GH1333 is as follows:
· Thin plates, strips, and medium-thick plates: 1170℃-1200℃, rapid air cooling, holding time determined by plate thickness;
· Bars, forgings, and rings: 1093℃±28℃, water quenching or rapid air cooling, holding time of 10 minutes for every 25.4mm thickness.
Proper heat treatment can further enhance its hardness and strength, making it suitable for various high-load applications.
6. Application Fields
GH1333 is widely used in the following fields:
· High-temperature load-bearing components such as flame tubes and transition sections of gas turbines for long-term use on land and at sea;
· Components of high-temperature furnace equipment, such as muffle furnace covers and radiant heating tubes;
· Other applications requiring heat and corrosion resistance.
Previous Page
Gh1180
Next Page
Related Products
Product Consulting
Leave your contact information to get a free product quote!