Product classification
Gh2026
The long-term operating temperature range of GH2026 is from 540°C to 570°C, with a maximum operating temperature of up to 677°C. This alloy is strengthened by solid solution strengthening through the addition of chromium and molybdenum, and the introduction of high titanium and low aluminum elements forms the γ′ aging strengthening phase. The role of cobalt is to reduce the solubility of titanium and aluminum in the solid solution, promoting an increase in the amount of γ′ phase precipitation, thereby enhancing its thermal stability and reducing the stacking fault energy of the γ′ phase.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
GH2026 is a Fe-Ni-Co-Cr based precipitation hardening deformation high-temperature alloy, widely used in aerospace, energy, and chemical industries due to its excellent high-temperature strength and good thermal stability.
1. Overview
The long-term service temperature range of GH2026 is from 540℃ to 570℃, with a maximum service temperature of up to 677℃. This alloy is strengthened by solid solution strengthening through the addition of chromium and molybdenum, and high titanium and low aluminum elements are introduced to form the γ′ aging strengthening phase. The role of cobalt is to reduce the solubility of titanium and aluminum in the solid solution, promoting an increase in the amount of γ′ phase precipitation, thereby improving its thermal stability and reducing the stacking fault energy of the γ′ phase.
2. Application Overview and Characteristics
Due to its superior comprehensive performance, GH2026 has excellent stress relaxation resistance and creep resistance, and it is not sensitive to notches, making it suitable for the production of parts such as bolts, gas seal spring sheets, sealing rings, and pins. This alloy has been successfully applied to fasteners for ground gas turbines, capable of operating for over 100,000 hours under steam conditions of 540℃ to 570℃, performing well. Similar foreign alloys are also used for fasteners and blades in aviation turbine engines.
3. Material Grades and Similar Grades
The grades of GH2026 include GH2026, GH26, R-26, while the similar foreign grade is Refractaloy26 (USA).
4. Material Technical Standards
The technical standards followed by GH2026 include the technical conditions for GNS26 (R-26) alloy in Fu Gao Xin 87-1 and the technical conditions for HJ418 R-26 high-temperature alloy fasteners.
5. Chemical Composition
The chemical composition of GH2026 includes but is not limited to carbon (C), chromium (Cr), nickel (Ni), cobalt (Co), molybdenum (Mo), titanium (Ti), aluminum (Al), boron (B), silicon (Si), manganese (Mn), phosphorus (P), and sulfur (S). The specific content range is shown in the table below 42:
6. Heat Treatment System
The standard heat treatment system for GH2026 is 1025℃±13℃ for 1 hour oil quenching, followed by 815℃±8℃ for 20 hours air cooling, and finally 730℃±8℃ for 20 hours air cooling.
7. Physical, Elastic, and Chemical Properties
The physical properties of GH2026 include melting temperature range, phase transition point, thermal conductivity, electrical resistivity, thermal diffusivity, specific heat capacity, linear expansion coefficient, etc. Its density is 8.20g/cm³, with excellent elastic and chemical properties.
8. Mechanical Properties
The mechanical properties of GH2026 are outstanding, including high strength, good plasticity, durability, and impact resistance. The mechanical properties vary under different heat treatment conditions, for example, the room temperature performance and durability after standard heat treatment.
9. Process Performance and Requirements
The forming process of GH2026 requires precise control of parameters such as ingot heating temperature, open forging temperature, and stop forging temperature. It is recommended to use low speed, less feed, and slow cutting to achieve the best processing effect during alloy processing.
10. Microstructure
The microstructure of the alloy after standard heat treatment consists of a γ matrix, γ′ phase, TiC, TiN, M3B2 type borides, and M6C type carbides. The γ′ phase, as the main strengthening phase, is distributed in fine particles, significantly contributing to the alloy's performance.
11. Supply Technical Standards
The main supply technical standards for GH2026 involve performance, impact performance, compressive performance, torsional performance, shear performance, and tensile performance as specified in the technical standards.
12. Main Specifications and Supply Status
The main specifications of GH2026 include seamless pipes, steel plates, round steel, forgings, flanges, rings, welded pipes, steel strips, straight bars, wire materials and matching welding materials, round cakes, flat steel, hexagonal bars, reducers, elbows, tees, and machined parts.
Previous Page
Gh188
Next Page
Related Products
Product Consulting
Leave your contact information to get a free product quote!