contact:186-1652-5389
021-57758901
Product classification
Incoloy330
Incoloy 330 (N08330) is a nickel-iron-chromium austenitic alloy designed for oxidation and carburizing at high temperatures. The nickel content of 34%-37% gives the material high resistance to chloride stress corrosion cracking and sigma phase precipitation embrittlement. The material is machined through standard machining procedures for stainless steel and nickel alloys. It is widely used to resist corrosion in the environment where circulating heating and carburizing are combined.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
|
Incoloy 330 Incoloy 330 (N08830) Nickel-Based Alloy Chemical Composition: |
|
C≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
Cr≥ |
Ni≥ |
Mo≥ |
Cu≤ |
|
0.08 |
0.75-1.50 |
2.00 |
0.030 |
0.030 |
17.0-20.0 |
34.0-37.0 |
1.0-1.75 |
1.00 |
|
other |
Sn≤ |
Pb≤ |
Ti≤ |
Fe≤ |
Co≤ |
V≤ |
W≤ |
Nb≤ |
|
0.025 |
0.005 |
- |
- |
- |
- |
- |
- |
Incoloy 330 (N08830) nickel-based alloy physical properties:
1. Incoloy 330 (N08830) nickel-based alloy density:
(1) 8.08 g/cm3 (g/cm³).
(2) 0.292 lb/in3 (pounds per cubic inch).
2. Specific heat of Incoloy 330 (N08830) nickel-based alloy:
(1): 0.11 BTU/lb/°F (32 - 212°F) (British thermal/lbs/Fahrenheit).
(2): 460 Joules/kg/°C (0 - 100°C) (J/kg/C).
3. Incoloy 330 (N08830) nickel-based alloy permeability: 1.02 at 70°F/20°C (RT).
4. Electrothermal characteristics of Incoloy 330 (N08830) nickel-based alloy:
|
temperature |
Thermal conductivity |
Resistivity |
|||
|
°F |
°C |
Btu-in/ft2-h-°F★ |
Watts/m/Celsius |
Microohm centimeters |
Microohms. rice |
|
75 |
24 |
86 |
12.4 |
612 |
1.017 |
|
400 |
204 |
108 |
15.6 |
649 |
1.079 |
|
800 |
427 |
134 |
19.3 |
688 |
1.144 |
|
1200 |
649 |
162 |
23.4 |
721 |
1.199 |
|
1600 |
871 |
198 |
28.6 |
744 |
1.237 |
|
1800 |
982 |
216 |
31.2 |
749 |
1.245 |
Note: Btu-in/ft2-h-°F refers to the amount of heat directly conducted per hour per square foot or inch of material at a temperature difference of degrees Fahrenheit. The heat is Btu (1 btu is the energy required to heat 1 pound of water to 1 degree Fahrenheit).
Mechanical properties of Incoloy 330 (N08830) nickel-based alloy:
1. Mechanical properties of annealed at room temperature
|
Ultimate tensile strength, ksi(MPa) |
80 - 85 (552 - 586) |
|
0.2% Conditional Yield Strength, ksi(MPa) |
30 - 43 (207 - 296) |
|
Two-inch elongation % |
40 - 45 |
|
Hardness, Rockwell B grade |
70 - 85 |
Incoloy 330 (N08830) Nickel-Based Alloy Corrosion Resistance:
Incoloy 330 (N08830) has excellent corrosion resistance, especially in oxidizing, carburizing, and nitriding environments. In an aqueous environment, the chromium component of 330 can resist oxidation environment corrosion, and the nickel component can enhance the resistance to reducing corrosion. The alloy's high nickel content makes the material highly resistant to chloride stress corrosion cracking and sigma phase embrittlement.
Incoloy 330（N08830）镍基合金抗氧化性：
Incoloy 330（N08830）具有优异的抗氧化性，温度高至2000°F (1095°C)条件下抗结垢能力很好。任何氧化皮形成后都会紧紧地附着在材料表面上，特别是在冷热循环交替条件下。
Incoloy 330（N08830）镍基合金抗渗碳性：
35%的镍和一定量的硅使材料具有优异的抗渗碳作用。在渗碳作用和氧化作用交替环境下，合金330表现出极佳的抗“绿腐病”现象。
Incoloy 330（N08830）镍基合金热处理：
Incoloy 330（N08830）是一种奥氏体不锈钢，它不能通过热处理进行硬化。只有通过冷加工才能进行硬化，达到室温的强度。对于大多数的高温环境应用，330在冷成形或者焊接后不作退火处理。 如果材料需要完全退火，应在1870-2050°F (1020-1120°C)的温度范围内进行。对材料进行水淬可以得到较佳的抗蠕变性能，但迅速冷却至800°F (425°C)以下也能达到同样效果。
Previous Page
Next Page
Previous Page
IncoloyA-286
Next Page
Related Products
Product Consulting
Leave your contact information to get a free product quote!
Our company mainly deals in nickel based special alloys such as high-temperature alloys, Hastelloy alloys, Inconel alloys, Monel alloys, precision alloys, titanium alloys, etc. We provide zero cutting, machinability, non-standard customization and other needs. If you have any needs, please contact us in a timely manner!
Navigation
Contact
Building 1, Lane 103, Sizhuan Road, Songjiang District, Shanghai
Browse Mobile