Product classification
GH3536/GH536 nickel-based high-temperature alloy
GH3536 is a nickel-based high-temperature alloy with a high iron content, primarily strengthened by chromium and molybdenum. It has good resistance to aging and corrosion, with moderate durability and creep strength below 900°C. It also has good cold and hot workability and welding performance. It is used in the manufacture of combustion chamber components and other high-temperature parts for aircraft engines, with long-term use below 900°C and short-term working temperatures up to 1080°C. The main supplied varieties include plates, strips, pipes, bars, forgings, rings, and precision castings.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
GH3536
Chinese grade: GH3536/GH536 nickel-based high-temperature alloy
American grade: HastelloyX/UNS NO6002
French grade: NC22FeD
German grade: NiCr22FeMo
British grade: Nimonic PE13
1.Overview of GH3536 (HastelloyX) nickel-based high-temperature alloy:
GH3536 is a nickel-based high-temperature alloy with a higher iron content, primarily strengthened by chromium and molybdenum solid solution. It has good resistance to aging and corrosion, moderate long-term and creep strength below 900℃, and good cold and hot workability and weldability. It is used to manufacture combustion chamber components and other high-temperature parts for aircraft engines, with long-term use below 900℃ and short-term working temperatures up to 1080℃. The main forms supplied include plates, strips, pipes, bars, forgings, rings, and precision castings.
1. GH3536 material grade: GH3536 (GH536, GH22, GH334, GH739, SG-5)
2. Similar grades to GH3536: UNS NO6002, HastelloyX (USA), NiCr22FeMo (Germany), Nimonic PE13 (UK).
3. Technical standards for GH3536 material:
4. Chemical composition of GH3536: see Table 1-1.
Table 1-1 %
| C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ |
| 0.05-0.15 | 1.00 | 1.00 | 0.025 | 0.015 | 20.5-23.5 | Remainder | 8.0-10.0 | 0.50 |
| Others | N≤ | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | B≤ |
| - | 0.50 | 0.15 | 17.0-20.0 | 0.50-2.50 | - | 0.20-1.00 | 0.010 |
Note: B is added according to calculation, not analyzed.
5. GH3536 heat treatment system: Plates and pipes: 1130~1170℃, rapid air cooling or water cooling; Bars and ring samples: 1175℃±15℃, air cooling or faster cooling; Strips: 1065~1105℃, rapid cooling.
6. GH3536 varieties, specifications, and supply status: Plates of δ0.5~4.0mm, strips of δ0.05~0.8mm, pipes with an outer diameter of 4~20mm and wall thickness of 1.0~2.0mm, welding wires with a diameter of 0.2~10.0mm, bars with a diameter ≤300mm, and various diameters and wall thicknesses of rings as well as precision castings of different shapes and sizes. Plates, strips, and pipes are supplied after solution treatment and pickling; strips can also be supplied in cold-rolled state; welding wires are delivered in hard, semi-hard, solid solution plus pickling, and bright solid solution treatment states, and can also be delivered in straight bars; bars and rings are delivered without heat treatment. Precision castings are supplied in casting state.
7. GH3536 smelting and casting process: Electric arc furnace plus electroslag or non-vacuum induction furnace plus electroslag remelting process is used. For producing castings, the alloy is remelted in an induction furnace and then poured into a heated mold shell, with a faster pouring speed being preferable.
8. GH3536 application overview and special requirements: This alloy has been widely used in foreign aircraft engines and civil industries, and in China, it is mainly used for manufacturing combustion chamber components and other hot-end components as well as honeycomb structures. The alloy exhibits a certain aging hardening phenomenon after long-term use at high temperatures.
2.GH3536 physical and chemical properties: GH3536 thermal properties:
1. GH3536 (GH536) melting temperature range: 1295~1381℃[1]
2. GH3536 (GH536) thermal conductivity: see Table 2-1
3. GH3536 specific heat capacity: see Table 2-2.
4. GH3536 density: ρ=8.3g/cm3
Table 2-1[1]
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 |
| λ/(W/(m·℃)) | 13.38 | 17.97 | 20.27 | 22.40 | 24.62 | 26.79 | 29.05 | 31.14 | 33.44 |
Table 2-2
| θ/℃ | 17 | 100 | 200 | 280 | 408 | 500 | 600 | 700 | 800 | 900 |
| c/(J(kg·℃)) | 372.6 | 372.6 | 389.4 | 456.4 | 427.1 | 452.2 | 464.7 | 515.0 | 535.9 | 561 |
3.Characteristics of GH3536 alloy:
1. Easy machinability.
2. Moderate long-term and creep strength at 900℃.
3. Good oxidation resistance and corrosion resistance.
4. Suitable for long-term use of aircraft engine combustion chambers and afterburner components below 900℃.
5. Good welding performance and cold, hot workability.
4.Application fields of GH3536:
1. Industrial and aviation gas turbines (combustion chamber, rectifier, structural cover).
2. Industrial furnace components, support rollers, grates, ribbons, and radiation tubes.
3. Spiral tubes in petrochemical furnaces.
4. High-temperature gas-cooled nuclear reactors.
Five,Process performance and requirements of GH3536:
1. The solution treatment temperature range is 1160℃ to 1190℃, preferably around 1175℃.
To achieve maximum creep strength, it is recommended to use water quenching for cooling. For materials with a thickness of less than 1.5mm, rapid air cooling can also be used. The stress relief annealing temperature is up to 870℃. During the heat treatment process, the workpiece must be kept clean.
2. The adhesion of surface oxides and welding slag around the weld seam after descaling is stronger than that of stainless steel, so it is recommended to use fine-grained sandpaper or fine-grained grinding wheels for polishing.
3. Before pickling with HNO3/HF mixed acid, sandblasting or grinding must be done to break the oxide film.
4. Machining: Machining should be done in the solution-treated state. Due to the high work hardening of Nicrofer 4722 Co, it is advisable to use low cutting speeds and heavy feed to machine below the already cold-worked hardened surface.
5. Welding: Various welding processes can be used, such as tungsten electrode inert gas shielded welding, plasma arc welding, manual submerged arc welding, metal inert gas shielded welding, and melting electrode inert gas shielded welding. Pulse arc welding is preferred. Before welding, the material should be in the solution-treated state, and the oxide scale, oil stains, and various markings should be removed. The area about 25mm wide on both sides of the weld seam should be polished to a bright metal surface. Low heat input should be used, with interlayer temperature not exceeding 100℃.
6. No pre-weld and post-weld heat treatment is required.
Six,Varieties, specifications, and supply status of GH3536:
1. Variety classification: GH3536 seamless pipe, GH3536 steel plate, GH3536 round steel, GH3536 forgings, GH3536 flanges, GH3536 rings, GH3536 welded pipes, GH3536 steel strips, GH3536 wires, and GH3536 matching welding materials.
2. Delivery status: Seamless pipe: solution + acid pickling, length can be customized; plate: solution, acid pickling, edge cutting; welded pipe: solution acid pickling + RT% flaw detection, forgings: annealed + turned; bars in forged and rolled state, surface polished or turned; strips delivered in cold-rolled, solution soft state, and descaled; wires delivered in solution acid pickled coil or straight bar form, solution straight bar finely polished.
Previous Page
Next Page
Previous Page
GH4033 (GH33) high-temperature alloy
Next Page
Related Products
Product Consulting
Leave your contact information to get a free product quote!