Product classification
GH3044/GH44 nickel-based high-temperature alloy
GH3044 is a solid solution strengthened nickel-based oxidation-resistant alloy, which exhibits high plasticity and moderate thermal strength below 900°C. It has excellent oxidation resistance and good stamping and welding process performance, making it suitable for manufacturing components of aircraft engine main combustion chambers and afterburner chambers that operate long-term below 900°C, as well as thermal insulation screens and guide blades. The available forms include plates, strips, wires, bars, and rings.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
GH3044
Chinese grade: GH3044/GH44 nickel-based high-temperature alloy
1.Overview of GH3044 nickel-based high-temperature alloy:
GH3044 is a solid solution strengthened nickel-based oxidation-resistant alloy, which has high plasticity and moderate thermal strength below 900℃, as well as excellent oxidation resistance and good stamping and welding process performance. It is suitable for manufacturing components such as main combustion chambers and afterburner components of aircraft engines that operate for long periods below 900℃, as well as thermal insulation screens and guide blades. The available varieties include plates, strips, wires, bars, and ring-shaped parts.
1. GH3044 material grade: GH3044 (GH44)
2. GH3044 similar grades: ЗИ686, ХН60ВТ, ВЖ98 (Russia)
3. Technical standards for GH3044 material:
4. Chemical composition of GH3044: see Table 1-1.
Table 1-1
| C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ |
| 0.10 | 0.80 | 0.50 | 0.013 | 0.013 | 23.5-26.5 | Remainder | 1.50 | |
| Others | N≤ | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | Nb≤ |
| - | 1.50 | 0.30-0.70 | 4.00 | - | - | 13.0-16.0 | - |
Note: GJB2612-1996 also stipulates ω(Cu)≤0.20%; GJB3317-1998 and GJB3318-1998 stipulate ω(Cu)≤0.07%.
5. GH3044 heat treatment system: The solution treatment temperature for hot-rolled and cold-rolled plates and strips in the supply state is 1120~1160℃, air-cooled, and material performance inspection is conducted in the supply state.
6. GH3044 varieties, specifications, and supply state: δ4~14mm hot-rolled plates, δ0.5~4mm cold-rolled plates, δ0.1~0.8mm strips, bars with diameters d0.3~10mm, d20~300mm, and various diameters of ring-shaped parts can be supplied. Plates and strips are supplied after solution treatment, pickling, and edge trimming; wires are supplied in cold-drawn, solution-treated pickled, or semi-hard state, while bars and forgings are supplied without heat treatment.
7. GH3044 smelting and casting process: The alloy is melted using electric arc furnaces, non-vacuum induction furnaces, or vacuum induction furnaces + electroslag remelting or vacuum arc remelting processes.
8. Overview of GH3044 applications and special requirements: The alloy is used to make stamped and welded structural parts of plates for the main combustion chamber and afterburner of aircraft engines, as well as installation edges, conduits, and guide blades.
2.Physical and chemical properties of GH3044:
1. Thermal properties of GH3044:
(1) Melting temperature range of GH3044 (GH44): 1352~1375℃[1].
(2) Thermal conductivity of GH3044 (GH44): see Table 2-1.
Table 2-1[2]
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 950 |
| λ/(W/(m·℃)) | 11.7 | 13.0 | 14.2 | 15.9 | 17.2 | 18.4 | 19.7 | 21.8 | 24.7 | 25.1 |
(3) Specific heat capacity of GH3044: see Table 2-2.
Table 2-2[3]
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 |
| c/(J/(kg·℃)) | 440 | 461 | 482 | 503 | 524 | 545 | 545 | 566 | 587 | 629 |
(4) Linear expansion coefficient of GH3044: see Table 2-3.
2. Density of GH3044: ρ=8.89g/cm3.
3. Magnetic properties of GH3044: The alloy is non-magnetic.
4. Chemical properties of GH3044: The oxidation rate and intergranular oxidation depth of GH3044 after 100 hours of testing in air medium are shown in Table 2-4.
Table 2-4
| θ/℃ | 900 | 1000 | 1100 | 1200 |
| Oxidation rate/(g/m·h) | 0.0971 | 0.2050 | 0.4320 | 0.7880 |
| Intergranular oxidation depth/mm | 0.016 | 0.080 | 0.110 | --- |
3.Microstructure of GH3044:
After solution treatment at 1200℃, it is basically single-phase austenite with a small amount of MC and M23C6 type carbides. After long-term aging at 700~900℃, MC changes little, and M23C6 is distributed in a chain-like manner at the grain boundaries. As the aging time increases, the amount of precipitation increases, and the particles grow larger; at the same time, WCr solid solution precipitates in the grains and at the grain boundaries, appearing as particles, with the quantity gradually increasing and the size continuously growing as the aging time extends.
According to relevant technical standards, the grain size of cold-rolled thin plates in the supply state should be within the range of 4~8.
4.Process performance and requirements of GH3044:
1. Formability of GH3044:
(1) The forging heating temperature for GH3044 steel ingots is 1170℃±10℃, with a final temperature not lower than 900℃. The heating temperature for slab rolling is 1190±10℃, and the heating temperature for thin plate hot rolling is 1130℃±10℃, with a final rolling temperature not lower than 800℃; the total pressure reduction rate for thin plate cold rolling is about 30%.
(2) GH3044 plates have good stamping process performance. The limit deep drawing coefficient for cold-rolled thin plates in supply condition is K limit = 2.06.
2. GH3044 part heat treatment process:
The intermediate heat treatment temperature is 1140℃±10℃, with a holding time of 3~5 minutes, followed by air cooling. The final heat treatment temperature is determined by the working conditions of the parts. For parts requiring good thermal fatigue performance, a solution treatment at 1150℃ is applied, with a holding time of 3~5 minutes, followed by air cooling; for parts requiring higher thermal strength, a solution treatment at 1200℃ is applied, with a holding time of 3~5 minutes, followed by air cooling.
Five,Varieties and specifications of GH3044 and their supply conditions:
1. Variety classification: GH3044 seamless pipes, GH3044 welded pipes, GH3044 plates, GH3044 bars, GH3044 forgings, GH3044 rings, GH3044 wires, and GH3044 matching welding materials.
2. Delivery conditions: Seamless pipes: solution + acid pickling, length can be customized; plates: solution, acid washing, edge cutting; welded pipes: solution acid pickling + RT% flaw detection, forgings: annealing + turning; bars in forged and rolled state, surface polished or turned; strips delivered after cold rolling, solution soft state, and descaling; wires delivered in solution acid washed coil or straight bar form, solution straight bar fine polished state.
Previous Page
Previous Page
GH3625/GH625 nickel-based high-temperature alloy
Related Products
Product Consulting
Leave your contact information to get a free product quote!