Product classification
GH3030 nickel-based high-temperature alloy
GH3030 is an early developed solid solution strengthened high-temperature alloy with a composition of 80Ni-20Cr. It has a simple chemical composition and exhibits satisfactory thermal strength and high plasticity below 800°C, along with good resistance to oxidation, thermal fatigue, cold stamping, and welding process performance. After solution treatment, the alloy is a single-phase austenite, and its structure remains stable during use. The main products are cold-rolled thin sheets, but it can also supply deformed products such as bars, rings, wires, and pipes. It is mainly used for turbine engine combustion chamber components operating below 800°C and other high-temperature components that require oxidation resistance but bear very little load below 1100°C.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
GH3030
Chinese grade: GH3030 nickel-based high-temperature alloy
Russian grade: ЭИ435/XH78T
1.Overview of GH3030 nickel-based high-temperature alloy:
GH3030 is an early developed 80Ni-20Cr solid solution strengthened high-temperature alloy, with a simple chemical composition. It has satisfactory thermal strength and high plasticity below 800℃, and exhibits good oxidation resistance, thermal fatigue, cold stamping, and welding process performance. The alloy is single-phase austenite after solution treatment, and its structure is stable during use. The main products are cold-rolled thin plates, but bars, rings, wires, and pipes can also be supplied as deformed products. It is mainly used for turbine engine combustion chamber components working below 800℃ and other high-temperature components that require oxidation resistance but bear very little load below 1100℃.[1,2].
1. GH3030 material grade: GH3030 (GH30)
2. GH3030 similar grades: ЭИ435, XH78T (Russia)
3. Technical standards for GH3030 material:
4. GH3030 chemical composition: see Table 1-1.
Table 1-1 %
| C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ |
| 0.12 | 0.80 | 0.70 | 0.03 | 0.02 | 19.0-22.0 | Remaining | ||
| Others | N≤ | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | Nb≤ |
| - | 0.15 | 0.15-0.35 | 1.50 | - | - | - | - |
Note: 1. For bars and ring blanks, the standard specifies ω(Cu)≤0.20%.
2. For hot-rolled plates, cold-rolled plates, cold-rolled strips, pipes, wires, and cold heading cold-drawn wire, the standard specifies ω(Fe)≤1.00%, ω(P)≤0.015%, ω(S)≤0.010%, ω(Pb)≤0.001%, ω(Cu)≤0.007%.
5. GH3030 heat treatment system: solution temperature is 980~1020℃, cooling method for hot-rolled plates, cold-rolled thin plates, and ring blanks is air cooling; for cold heading wire and cold drawn bars, it is water cooling or air cooling; for pipes, it is water cooling.
6. GH3030 varieties, specifications, and supply status: various specifications of deformed products can be produced, bars and ring blanks are delivered without heat treatment; hot-rolled plates and cold-rolled thin plates and pipes are supplied after solution treatment and pickling; welding wires are delivered in cold drawn state, solution and pickling state, or semi-hard state in coils; cold heading wires are delivered in solution, pickling state in coils or straight bars, solution straight bars polished or cold drawn state; pipes are delivered in solution, pickling state; cold drawn bars are delivered in annealed, annealed plus pickling, annealed plus polished or cold drawn state.
7. GH3030 smelting and casting process: electric arc furnace melting or electric arc furnace melting plus electroslag remelting or vacuum arc remelting, non-vacuum induction furnace plus electroslag melting or vacuum arc furnace remelting or vacuum double process.
8. GH3030 application overview and special requirements: this alloy has undergone long-term use tests in aviation engines, mainly used for combustion chamber and afterburner components as well as casing installation edges and other components.
2.GH3030 physical and chemical properties:
1. GH3030 thermal properties:
(1) GH3030 melting temperature range 1374~1420℃[3].
(2) GH3030 thermal conductivity see Table 2-1.
(3) GH3030 specific heat capacity see Table 2-2.
(4) GH3030 linear expansion coefficient see Table 2-3.
(5) GH3030 blackness: see Table 2-4
Table 2-1
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 |
| λ/(W/(m·℃)) | 15.1 | 16.3 | 18.0 | 19.3 | 20.9 | 22.2 | 23.4 | 25.1 | 26.4 |
Table 2-2
| θ/℃ | 150 | 200 | 300 | 400 | 500 |
| c/(J/(kg.K)) | 565.2 | 598.7 | 674.1 | 741.1 | 820.6 |
Table 2-3
| θ/℃ | 20-100 | 20-200 | 20-300 | 20-400 | 20-500 | 20-600 | 20-700 | 20-800 | 20-900 |
| α/10-6C-1 | 12.8 | 13.5 | 14.3 | 15.0 | 15.5 | 16.1 | 17.0 | 17.5 | 18.0 |
Table 2-4
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 |
| Blackness① | 0.17 | 0.17 | 0.18 | 0.18 | 0.19 | 0.27 | 0.51 | 0.52 | 0.53 |
① is total radiation blackness (tested in air)
2. GH3030 Density: ρ=8.4g/cm3
3. GH3030 Electrical Properties: Resistivity at different temperatures: see Table 2-5
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 |
| Blackness① | 0.17 | 0.17 | 0.18 | 0.18 | 0.19 | 0.27 | 0.51 | 0.52 | 0.53 |
| θ/℃ | 20 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 |
| ρ/(10-6Ω.m) | 1.090 | 1.099 | 1.108 | 1.117 | 1.127 | 1.153 | 1.135 | 1.126 | 1.123 |
4. GH3030 Magnetic Properties: The alloy is non-magnetic.
5. GH3030 Oxidation Resistance: Oxidation rate in air medium: see Table 2-6
Table 2-6
| θ/℃ | 900 | 1000 | 1100 | 1200 |
| Oxidation rate/(g/(m2.h)) | 0.0535 | 0.1560 | 0.3905 | 0.5810 |
3.GH3030 Metallographic Structure: This alloy has a single-phase austenitic structure after solution treatment at 1000 degrees Celsius, with a small amount of TiC and Ti(CN).
4.GH3030 Process Performance and Requirements:
1. This alloy has good forgeability, with a forging heating temperature of 1180℃ and final forging at 900℃.
2. The average grain size of this alloy is closely related to the degree of deformation of the forged piece and the final forging temperature.
3. After heat treatment, the oxidation scale on the surface of the parts can be removed by sandblasting or acid cleaning.
5.Varieties, Specifications, and Supply Status of GH3030:
1. Variety Classification: GH3030 seamless pipe, GH3030 steel plate, GH3030 round steel, GH3030 forged piece, GH3030 flange, GH3030 round ring, GH3030 welded pipe, GH3030 steel strip, GH3030 wire, and GH3030 matching welding materials.
2. Delivery Status: Seamless pipe: solution + acid pickling, length can be customized; plate: solution, acid cleaning, edge cutting; welded pipe: solution acid pickling + RT% flaw detection, forged piece: annealed + turned; bar material in forged state, surface polished or turned; strip material delivered after cold rolling, solution soft state, and descaling; wire delivered in solution acid cleaned coil or straight bar form, solution straight bar fine polished state.
Previous Page
Previous Page
GH600/GH3600 nickel-based high-temperature alloy
Related Products
Product Consulting
Leave your contact information to get a free product quote!