Product classification
GH3039 high-temperature alloy
GH3039 is a single-phase austenitic solid solution strengthened alloy, which has moderate thermal strength and good thermal fatigue performance below 800°C, and good oxidation resistance below 1000°C. It has stable microstructure for long-term use, as well as good cold formability and weldability. It is suitable for components in aircraft engine combustion chambers and afterburner chambers for long-term use below 850°C. This alloy can be produced in the form of plates, bars, wires, pipes, and forgings.
Classification:
Key words:
Superalloy | Inkenel | Hastelloy | Inkloy | Precision Alloy Series
Product Parameters
GH3039
Chinese grade: GH3039 nickel-based high-temperature alloy
Russian grade: ЭИ602/XH75MБГЮ
1.Overview of GH3039 nickel-based high-temperature alloy:
GH3039 is a single-phase austenitic solid solution strengthened alloy, which has moderate thermal strength and good thermal fatigue performance below 800℃, and good oxidation resistance below 1000℃. It has a stable microstructure for long-term use, as well as good cold formability and weldability. It is suitable for components in aircraft engine combustion chambers and afterburner chambers for long-term use below 850℃. This alloy can be produced in plates, bars, wires, pipes, and forgings.
1. GH3039 material grade: GH3039 (GH39)
2. GH3039 similar grades: ЭИ602, ХН75МБГЮ (Russia)
3. Technical standards for GH3039 material:
4. Chemical composition of GH3039: see Table 1-1.
Table 1-1 %
| C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr≥ | Ni≥ | Mo≥ | Cu≤ |
| 0.08 | 0.80 | 0.40 | 0.020 | 0.012 | 19.0-22.0 | Remainder | 1.80-2.30 | |
| Others | N≤ | Al≤ | Ti≤ | Fe≤ | Co≤ | V≤ | W≤ | Nb≤ |
| - | 0.35-0.75 | 0.35-0.75 | 3.00 | - | - | - | 0.90-1.30 |
Note: 1). Ce is allowed to be present in the alloy.
2). ω(Cu) in the alloy = 0.20%.
5. GH3039 heat treatment system: Hot-rolled and cold-rolled plates and strips solution treatment: 1050~1090℃, air cooling. Bars and pipes solution treatment: 1050~1080℃, air cooling or water cooling.
6. GH3039 varieties, specifications, and supply status: Various specifications of hot-rolled plates, cold-rolled plates, strips, bars, wires, pipes, and forgings can be supplied. Plates, strips, and pipes are delivered after solution treatment and pickling. Wires are supplied in cold-worked state or solution state, and bars are delivered without heat treatment.
7. GH3039 smelting and casting process: The alloy is smelted using electric arc furnace melting, electric arc furnace or non-vacuum induction furnace with electroslag remelting or vacuum arc remelting, as well as vacuum induction furnace with electroslag or vacuum arc remelting process.
8. GH3039 application overview and special requirements: Components made from this alloy for aircraft engine combustion chambers and afterburner chambers have been tested through long-term production and use, showing good performance.
2.Physical and chemical properties of GH3039:
1. GH3039 thermal properties:
(1) GH3039 thermal conductivity: see Table 2-1.
Table 2-1
| θ/℃ | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 |
| λ/(W/(m·℃)) | 13.8 | 15.5 | 17.2 | 18.8 | 20.5 | 21.8 | 23.4 | 25.1 | 26.8 |
(2) GH3039 specific heat capacity: see Table 2-2.
Table 2-2
| θ/℃ | 150 | 200 | 300 | 400 | 500 | 600 | 700 | 800 |
| c/(J/(kg.K)) | 544 | 574 | 636 | 645 | 762 | 779 | 921 | 1047 |
(3) GH3039 linear expansion coefficient: see Table 2-3.
Table 2-3
| θ/℃ | 20-100 | 20-200 | 20-300 | 20-400 | 20-500 | 20-600 | 20-700 | 20-800 | 20-900 | 20-1000 |
| α/10-6℃-1 | 11.5 | 12.4 | 13.2 | 13.5 | 13.8 | 14.3 | 14.9 | 15.3 | 15.8 | 16.4 |
2. GH3039 density: ρ=8.3g/cm3.
3. GH3039 electrical properties: Room temperature resistivity ρ=1.18×10-6Ω·m.
4. GH3039 magnetic properties: The alloy is non-magnetic.
5. GH3039 chemical properties: GH3039 oxidation resistance:
(1) The oxidation rate of GH3039 after 100h test in air medium.
(2) The GH3039 alloy has a tendency to produce oxidation along grain boundaries when working at high temperatures for a long time. The depth of intergranular oxidation after 100h exposure at 900~1100℃: see Table 2-5.
(3) The oxidation weight gain of GH3039 alloy at high temperature within 100 hours: see Figure 2-1
Table 2-4
| θ/℃ | 900 | 1000 | 1100 | 1200 |
| Oxidation rate / (g/(m2· h)) | 0.074 | 0.251 | 0.535 | 1.061 |
Table 2-5
| θ/℃ | 900 | 1000 | 1100 |
| Oxidation depth along grain boundaries / mm | 0.020 | 0.052 | 0.068 |
Three,Mechanical properties of GH3039: The mechanical properties specified in the GH3039 technical standard: see Table 3-1
Table 3-1
| Standard number | Variety | Room temperature tensile properties | 800℃ tensile properties | ||||
| σb/MPa | δ5/% | φ/% | σb/MPa | δ5/% | φ/% | ||
| GJB 1952-1994 | Cold-rolled plate | 735 | 40 | - | 245 | 40 | - |
| GJB 2297-1995 | Aerospace pipe | 685① | 40① | - | 245 | 40 | - |
| GJB 3165-1998 | Bar stock | 735 | 40 | - | 245 | 40 | 40 |
| GJB 3317-1998 | Hot-rolled plate | 735 | 40 | 45 | 245 | 40 | 50 |
| GJB 3318-1998 | Cold-rolled strip | 735② | 40① | - | - | - | - |
| GB/T 15062-1994 | General purpose pipe | 635 | 35 | - | - | - | - |
Note: ① For pipes with an outer diameter >30mm and wall thickness >3.0mm, the room temperature σb≥635MPa, δ5≥30%.
② For strips with δ≤0.25mm, the room temperature σb≥660MPa, δ5Measured.
Four,GH3039 microstructure:
1. GH3039 phase transformation temperature:
2. GH3039 time-temperature-structure transformation curve:
3. GH3039 alloy microstructure:
(1) The solid solution state of GH3039 alloy is single-phase austenite, containing a small amount of Ti(CN), NbC, and M32C6carbides. After long-term aging at 600-900℃ or after use, M32C6type carbides precipitate, and the carbide particles precipitated after aging at 600-700℃ are small and evenly distributed within the grains and along the grain boundaries. When the aging temperature exceeds 700℃, they mainly precipitate along the grain boundaries and coalesce to grow. No harmful phases are formed in the alloy, and the microstructure stability is good.
(2) The standard for cold-rolled thin plates of GH3039 specifies that the requirement for grain size in the supplied state is 5-8 grades.
Five,GH3039 process performance and requirements: GH3039 forming performance:
1. GH3039 forging: The alloy has good plasticity in hot processing, and deformation performance is good. The forging heating temperature is 1170-1190℃, and the final forging temperature is not lower than 900℃, with a deformation amount of 50% for one heating.
2. GH3039 rolling: The rough rolling temperature for plates is 1100-1140℃, the finishing rolling temperature is 1050-1100℃, and the final rolling temperature is not lower than 850℃. When rolling alloys that have been remelted by electroslag or vacuum self-consumption, the finishing rolling temperature should be slightly lower than that of alloys melted in an electric arc furnace. The deformation amount in the final hot rolling pass should not be less than 13%, and the deformation amount for thin plate cold rolling is 30%-55%.
3. GH3039 stamping performance: The thin plates in the supplied state have good stamping habits, and the limit coefficients for stamping are shown in Table 5-1, with the general working coefficient being 80%-90% of the limit coefficient. The number of repeated bending to fracture for δ1.5mm thin plates in the supplied state is 20-29 times; the depth of the cup drawing test is 10.7-12.0mm. The δ8.5mm hot-rolled medium plate should undergo intermediate solid solution treatment immediately (not exceeding 12h) after deep drawing to eliminate stress.
Table 5-1
| Limit deep drawing coefficient | Limit flanging coefficient | Limit pressing coefficient | Minimum bending radius | |
| Flat head male die | Ball head male die | |||
| 2.10~2.14 | 1.85~2.00 | 0.30~0.33 | 0.45~0.53 | 1δ① |
① δ is the plate thickness.
Six,GH3039 varieties, specifications, and supply status:
1. Variety classification: GH3039 seamless pipe, GH3039 steel plate, GH3039 round steel, GH3039 forgings, GH3039 flanges, GH3039 rings, GH3039 welded pipes, GH3039 steel strips, GH3039 wire materials, and GH3039 matching welding materials.
2. Delivery status: Seamless pipes: solution + acid pickling, length can be customized; plates: solution, acid washing, edge cutting; welded pipes: solution acid pickling + RT% flaw detection, forgings: annealed + turned; bars in forged and rolled state, surface polished or turned; strips delivered after cold rolling, solution soft state, and descaling; wires delivered in solution acid washed coil or straight bar form, solution straight bar fine polished state.
Previous Page
Previous Page
GH3030 nickel-based high-temperature alloy
Related Products
Product Consulting
Leave your contact information to get a free product quote!